Galway County Council · 2660805 · Galway
Latest linked evidence
2660805
Current planning index: New Application. Read the linked decisions for their full terms.
This page connects records for one planning case. Separate permissions, amendments and phases may belong to a wider development. A notified commencement date does not confirm that building work started.
Reviewed build intelligence
Government document review
Final amendment grant dated 25 August 2026; new interface works remain distinct from parent permission 25/60096 and indicative submitted design details.
4 official documents inspected · Checked 2026-09-06 · Official file index
Recorded in final amendment grant · Current amendment 26/60805 versus the earlier compound permission 25/60096
What the evidence says
The final grant dated 25 August 2026 relates solely to amendments to permission 25/60096. The described additions include an interface marshalling kiosk, approximately 50 m of 110 kV underground cable, a roughly 15 m by 1.5 m walkway and a 6.5 m high by 13 m long fire wall. Condition 1 keeps the earlier permission and effective period in force except where expressly amended. This is not a second complete transformer compound.
Current amendment 26/60805 versus the earlier compound permission 25/60096
Why it may matter — interpretation
Grid and civil teams can isolate the additional interface works from the already permitted compound.
What is not established
Construction, energisation, the earlier permission’s full conditions and any subsequent compliance designs are unverified.
Cloon transformer compound: final amendment grant · p.1
25 AUG 2026 · Issued 2026-08-25 · Final grant; 12 conditions; earlier 25/60096 remains the parent permission · Checked 2026-09-06
25 AUG 2026
Cloon transformer compound: final amendment grant · p.2
relates solely to amendments · Issued 2026-08-25 · Final grant; 12 conditions; earlier 25/60096 remains the parent permission · Checked 2026-09-06
relates solely to amendments
Final amendment grant; submitted design detail remains indicative · Typical indicative trench detail received 21 May 2026; not a selected cable or installed route
What the evidence says
Drawing CLO001 TRACOM 003 shows three power ducts labelled 160 mm outer-diameter HDPE, SDR 17.6, and separate communications ducts labelled 125 mm. It calls for CBGM B bedding, compacted Clause 804 backfill, marker strips and pull ropes. Its note leaves precise specification to ESB/EirGrid. The earth-continuity duct label contains an apparent unit typo and is not silently corrected into a specification here.
Typical indicative trench detail received 21 May 2026; not a selected cable or installed route
Why it may matter — interpretation
Cable designers and duct suppliers can identify the proposed duct classes and the network-owner detail still to be confirmed.
What is not established
Final network-owner detail, cable conductor/rating, duct supplier and installed route are unverified.
Typical 110 kV ducting in transformer compound · p.1
HDPE ESB Approved Duct · Issued 2026-05-11 · Rev B; CLO001 TRACOM 003 Elevation; received 21 May 2026; indicative network-owner detail · Checked 2026-09-06
HDPE ESB Approved Duct
Final amendment grant; submitted design detail remains indicative · Submitted control-building context within an amendment to the previously permitted compound
What the evidence says
The control-building drawing shows 100 mm outer blockwork, a 125 mm cavity with 80 mm Kooltherm K108 or similar approved, and a 215 mm inner leaf. Its note says elevations and dimensions are indicative and precise details remain to be determined. This attached compound drawing provides material context; the amendment’s scope does not establish a newly added control building.
Submitted control-building context within an amendment to the previously permitted compound
Why it may matter — interpretation
Envelope designers and insulation suppliers can compare the named option with later approved assemblies.
What is not established
Final insulation selection, wall performance, procurement and whether this assembly has been built are unverified.
Cloon control-room elevations and section · p.1
Kooltherm K108 · Issued 2026-05-11 · Rev B; CLO001 TRACOM 002 Elevation; planning drawing, received 21 May 2026 · Checked 2026-09-06
Kooltherm K108
Final amendment grant; submitted design detail remains indicative · Indicative control-room section; no added building quantity inferred
What the evidence says
The same section shows a 150 mm reinforced-concrete subfloor over 50 mm Kingspan Kooltherm K3, a Monarflex RMB 350 radon barrier/DPM, blinding and compacted hardcore. It also shows a 200 mm hollowcore ceiling with a 50 mm structural screed. These are indicative submitted compound details and do not establish a new control-building package under this amendment.
Indicative control-room section; no added building quantity inferred
Why it may matter — interpretation
Structural and waterproofing designers can check the proposed floor build-up and membrane interface against final details.
What is not established
Selected reinforcement design, membrane system, floor performance and installed assembly are unverified.
Cloon control-room elevations and section · p.1
Monarflex RMB 350 · Issued 2026-05-11 · Rev B; CLO001 TRACOM 002 Elevation; planning drawing, received 21 May 2026 · Checked 2026-09-06
Monarflex RMB 350
Final amendment grant; submitted design detail remains indicative · Indicative track and walkway details for the compound interfaces
What the evidence says
The typical detail shows a 1.5 m walkway with minimum 150 mm crushed stone over minimum 150 mm compacted subgrade, and a separate 4 m track with minimum 100 mm crushed stone over minimum 150 mm compacted subgrade. Drainage swales are shown beside both. These typical widths are not multiplied into an unverified total surfacing quantity.
Indicative track and walkway details for the compound interfaces
Why it may matter — interpretation
Civil designers and aggregate suppliers can distinguish pedestrian and vehicle build-ups before preparing quantities.
What is not established
Final lengths, pavement calculations, aggregate selection and installed areas are unverified.
Typical access track and walkway detail · p.1
Minimum 150mm Crushed Stone · Issued 2026-05-11 · Rev B; CLO001 TRACOM 006 Elevation; received 21 May 2026; indicative dimensions · Checked 2026-09-06
Minimum 150mm Crushed Stone
Recorded in final amendment grant · Pre-commencement condition in the final amendment permission
What the evidence says
Condition 7 of the final amendment grant requires an external-lighting plan for written agreement before commencement. This decision does not establish the luminaire count, selected product, colour temperature or installed lighting.
Pre-commencement condition in the final amendment permission
Why it may matter — interpretation
Lighting designers can identify the missing approved scheme before specifying fittings or assessing spill.
What is not established
The agreed later lighting plan and installed equipment have not been inspected.
Cloon transformer compound: final amendment grant · p.3
external lighting plan · Issued 2026-08-25 · Final grant; 12 conditions; earlier 25/60096 remains the parent permission · Checked 2026-09-06
external lighting plan
Selected pages of 4 government-published PDFs were visually inspected. The exact official index has 38 file links. Four PDFs were retrieved and selected relevant pages visually inspected; remaining correspondence and the wider NIS were not reviewed. Proposals do not establish procurement or installed work.
Source history
2660805
2660805
Conditional permission
2660805
Only exact linked records appear here. A missing appeal, commencement or completion entry means that evidence has not been established on this page. It does not prove that the event never happened.
Planning scale and individual notice or phase quantities remain separate. Notice quantities are not added into a development total or completion percentage.